HOT LINE UP

LamyRheology Viscometer  Rheometer

LamyRheology Viscometer
Rheometer

Brookfield Texture Analyzer

Brookfield Texture Analyzer

Sekonic Oscillation Viscometer

Sekonic Oscillation Viscometer

Refrigerated & Heated Circulating Baths

Refrigerated & Heated Circulating Baths

Heller Mark 5 Series Reflow System

Heller Mark 5 Series Reflow System

High-Speed High-Precision Hybrid AOI model YSi-12

High-Speed High-Precision Hybrid AOI model YSi-12

HOT LINE UP

gas nitriding/nitro-carburizing control system

Gas Fired Air Heater Unit

gas nitriding/nitro-carburizing control system

Compound layer simulation software

gas nitriding/nitro-carburizing control system

gas nitriding/nitro-carburizing control system

nitriding simulation

nitriding simulation

AIR HEATING

Packaged combustion units to raise temperature of fresh air or recircurated process air in industries where processes include heating through air or process air, such as paint drying ovens, paper dryers, curing and preheaters. We have two kinds of air heatings, one direct heating and the other indirect heating. With the former heating, combustion flue directly touches parts to be heated to release the heat to the parts. The latter heating are usually used for process where direct touching of combsution flue gas with parts is not preferable.

DIRECT AIR HEATER UNITS /INDIRECT AIR HEATER UNITS

DIRECT AIR HEATER UNITS

Direct air heat units generate hot air by heats from burner combsutioning releasing to process air, which is fresh air, recircualted air or process air. We have two types of the units for this method of heating. GSA-C is designed and assembled to install it into a section of air ducts. It has air duct section as combustion chamber, gas valve train, combustion blower, igniter, pressure switches and modulating valve and actuator, and electrical wiring between the component and terminal box.
SA-S is designed for machines, where heaters are integrated on side wall of the machine to heat internal air flow. GSA-S does not have gas train, but ignter, combustion blower, blower air switch and flame detectors installed on a board. The board is installed into a hole provided in the machine.


Products Information

 

INDIRECT AIR HEATER UNITS

In order to better quality of surface finishment, higher level of waste heat recovery system, more indirect heating become more common in air heating industry. It has more than 80% thermal efficiency, exhaust gas temperature is around 250 Degree Centigrade. Best suitable burners are used for the indirect heaters as specific requirement.

Products Information Click brings you to manufacturer's web site